haj282 發表於 2017-6-14 16:06:34

pfsense建立的l2tp連上後只能ping通lan口地址

本文章最後由 haj282 於 2017-6-14 04:23 PM 編輯

互聯網地址與內部網地址均採用固定ip設定。
pfsense建立的l2tp,通過客戶機的vpn客戶端連上後只能ping通lan口地址,其他與lan在同一網段的地址均無法ping通
這還不是最奇怪的,我登錄pfsense,通過Diagnostics->ping來檢測對應的與lan同一網段其他地址的聯通性,均正常!
而且ping過的網址在arp table中均有列出
現在就搞不清,爲什麼會出現這種問題,請各位幫出出主意,多謝!
版本是2.34 amd64
rules wan


StatesProtocolSourcePortDestinationPortGatewayQueueScheduleDescriptionActions
                                                 0 /0 B
      IPv4 ESP                                                ** *         * *       none   
                                                 0 /936 B
      IPv4 UDP* *   *500 (ISAKMP) *none      
                                                 0 /2.44 MiB
      IPv4 UDP                                                ***1701 (L2TP)*none

rules lan


StatesProtocolSourcePortDestinationPortGatewayQueueScheduleDescriptionActions
5 /7.08 MiB
***LAN Address80**Anti-Lockout Rule
33 /8.58 MiB
      IPv4* LAN net *   * *       *noneDefault allow LAN to any rule      

rules l2tp


StatesProtocolSourcePortDestinationPortGatewayQueueScheduleDescriptionActions
1 /167.99 MiB
      IPv4*                                                **   LAN net* *none

MarchFun 發表於 2017-6-19 22:41:57

試著將 rules l2tp 的 Destination 也改成 *

haj282 發表於 2017-7-1 11:09:04

感謝提供解決辦法,我按照您的辦法試了一下,問題還是沒解決。
頁: [1]
檢視完整版本: pfsense建立的l2tp連上後只能ping通lan口地址